Description
Enviro Imper is a bitumen modified waterproofing sheet commonly referred to as APP torch-on membrane. Manufactured using co-extrusion of elasto-plastomeric bitumen polymer combined with a continuous polyester non-woven reinforcement, ensures a homogenous quality product.
Advantages
• Low VOC content
• ISO 9001 quality assured
• Available in 3mm and 4mm thickness
• Wide range of operating temperatures
• Versatile
• Continuously reinforced
• Inhibits plant growth
Uses
Suitable as single layer or as part of a built up system of waterproofing. For all exposed waterproofing application.
• Podiums
• Green Roofs
• Flat Roofs
• Balconies
• Planter Boxes
• Car Parks
• Retaining Walls
Physical Properties
• Thickness 3mm & 4mm
• Roll Weight 35 kg & 45 kg
• Roll size (w x l) 1 x 10 1 x 10
• Colour Grey
• Resistance 130N
• Elongation 45%
• N/5cm Longitudinal 780
• Transversal 600
• Operating temperature -10?C to +120?C
Application Directions
Substrate Preparation
Substrates are to be free from surface contaminants, grease, coatings and curing membranes and any materials that are likely to damage the membrane.
Application
Enviro Imper is to be applied by gas torch, on a suitable primed substrate. Refer to Enviro Prime BB for further details.
Packaging
Enviro Imper is available in standard rolls of 10m x 1m (LxW) in 3mm and 4mm thickness.
Limitation
Enviro Imper apart from those with mineral finish are to be protected from UV and can not be left exposed. Substrates are to have adequate falls to outlets to address water to those outlets. Refer to local legislation or codes.
Finishes
4mm Enviro Imper is available in green or grey. Enviro Imper is also available in Garden grade to inhibit plant root growth.
Safety Advice
Before using this product refer to the Material Safety Data sheets.
Product of Italy
Downloads
- Technical Data Sheet
- VOC Certificate
