|
Description
Enviro HP1600 is a two component, spray in place, solvent free, flexible, 100% solids polyurea elastomer system.
Enviro HP1600 is a fast curing, textured surface, multipurpose material designed for commercial and industrial applications requiring high chemical resistance, abrasion resistance, impact protection and sealing of cementitious, metal and wood surfaces at temperatures up to 170ºC.
Advantages
|
· Fast Curing
|
· Flexible
|
|
· Solvent Free
|
· 100% Solids
|
|
· UV Stable
|
· Moisture Tolerant
|
|
· High Chemical Resistance
|
· Excellent Abrasive Resistance
|
|
· Trafficable
|
|
Uses
To provide a 100% trafficable waterproof, wear and chemical resistant coating in commercial and industrial applications such as the following areas;
|
· Mining Slurry Pits
|
· Sewerage Treatment
|
|
· Roof Tops
|
· Tanks
|
|
· Chemical Bund Areas
|
· Cut & Covered Tunnels
|
|
· Non- Slip Floors
|
· Pipes
|
|
· Materials Handling Applications
|
· Critical Waterproof Areas
|
Physical Properties
Enviro HP1600 is supplied as a 2 component spray applied coating system.
|
· Mix Ratio (by volume)
|
1:1
|
|
· Mix Time @ 20ºC
|
3 seconds
|
|
· Gel Time @ 20ºC
|
6 seconds
|
|
· Cure Time @ 20ºC
|
85% - 1hour
100% - 7 days
|
|
· Density (kg/m³) ASTM-D-1662
|
1100
|
|
· Hardness (Shore D) ASTM-D-2240
|
60
|
|
· Abrasion Resistance ASTM-D-4060
|
0.6%/1000 cycles
|
|
· Tensile Strength (MPa)
|
22.2
|
|
· Elongation (%) ASTM-D-2370
|
105%
|
|
· Tear Resistance (lb/lin in.) ASTM-D-1004
|
450
|
|
· Colour
|
Off White / Cream
|
|
· Specific Gravity
|
A – 1.15
B – 1.08
|
Chemical Resistance
|
Material
|
Resistance
|
|
Acetic Acid (10%)
|
Excellent
|
|
Alcohol
|
Excellent
|
|
Automotive Petrol
|
Good
|
|
Automotive Oil
|
Good
|
|
Aviation J P Fuel
|
Excellent
|
|
Benzene
|
Good
|
|
Boric Acid
|
Excellent
|
|
Brine Solution
|
Excellent
|
|
Citric Acid (10%)
|
Excellent
|
|
Diesel Fuel
|
Good
|
|
Formic Acid (5%)
|
Excellent
|
|
Hydrochloric Acid (5%)
|
Excellent
|
|
Hydrochloric Acid (45%)
|
Fair
|
|
Hydrogen Peroxide (10%)
|
Excellent
|
|
Kerosine
|
Excellent
|
|
Lactic Acid (10%)
|
Fair
|
|
Linseed Fatty Acid
|
Excellent
|
|
Nitric Acid (10%)
|
Excellent
|
|
Phophoric Acid (50%)
|
Excellent
|
|
Potash Lye (20%)
|
Excellent
|
|
Saline Solution (30%)
|
Excellent
|
Processing Information
Enviro HP1600 must be sprayed using high pressure plural component dispensing equipment. Drums of components should be pre-heated to at least 25ºC prior to mixing or dispensing.
Mix polyol thoroughly with a mechanical power mixer before use.
Machine Dispensing
|
Equipment Pressure
|
2000 psi minimum
|
|
Gun
|
#02 Spray Chamber
|
|
Part A
Hose Temp
System temp
|
60ºC
60ºC +
|
|
Part B
Hose Temp
System temp
|
60ºC
60ºC +
|
Application Directions
Substrate Preparation
The surface must be clean, dry and free from all loose particles including dust, laitance, grease, coatings, curing compounds and any other foreign matter. The substrate must be prepared by way of degreasing, grinding or captive shot blasting to provide and adequate surface profile.
For sub-grade application, a minimum of 1.5mm Dry Film Thickness (DFT) is required.
Priming
Primer is not generally required for direct to geofabrics applications.
For masonry surfaces, apply Enviro Epoxy B-LV (sand seeded), Enviro Prime P2 or Enviro Prime P5 by brush, roller or spray to prepared substrate as per individual production recommendations. Allow primer to fully cure before proceeding with the application of Enviro HP1600.
Mixing
Mixing by way of 1:1 mix ratio (by volume) in heated plural component spray equipment such as EXP-2 or similar.
Estimating Data
The consumption of Enviro HP1600 will depend on weather and substrate conditions. As a guide: 1.1kg of Enviro HP1600 will cover 1m² @ 1mm Dry Film Thickness (DFT).
Storage
Both components in the HP1600 system should be stored in dry conditions out of direct sunlight. Containers should be tightly closed.
Cleaning
Cured Enviro HP1600 is difficult to remove chemically and therefore spillages should be minimized and clean up immediately to limit damage.
Safety Advice
Enviro HP1600 contents are considered non-flammable. Always provide adequate ventilation and wear appropriate Personal Protection Equipment (PPE) during use. Avoid breathing vapours. Avoid contact with skin. If swallowed, DO NOT induce vomiting, give glass of water and seek immediate medical advice. If contact with skin, wash off splashes of material with clean water and soap. If irritation occurs seek immediate medical advice. Refer to MSDS.
KEEP OUT OF REACH OF CHILDREN
Downloads
- Technical Data Sheet
- VOC Certificate
|
