|
Description
Enviro Epoxy SL is a solvent free, non shrink, hard wearing, easy to clean, self levelling floor system. Enviro Epoxy SL is seamless chemically resistant three component epoxy resin system suitable for commercial, industrial and residential vehicular and pedestrian traffic.
Advantages
Fast Application
Chemically Resistant
Seamless
Excellent Durability
Resistance to Bacterial Growth
100% Waterproof
Excellent Abrasion Resistance
Solvent Free
Pre Packed & Proportioned
Very low VOC
Trafficable
Uses
Enviro Epoxy SL is available in a selected colour range for high performance, chemical resistant applications.
Typical Uses
Plant Rooms
Showrooms
Medical Facilities
Laboratories
Food Processing Facilities
TV Studios
Warehouses
Breweries
Supermarkets
Hospitals
Car Dealerships
Pharmaceuticals
Physical Properties
Enviro Epoxy SL is supplied as a pre proportioned 3 component flooring system. Part A (liquid): Base, Part B (liquid): Hardener, Part C (filler): Aggregate, Part D (paste): Colourpack.
Compressive Strength 90MPa
Flexural Strength 30MPa
Shelf Life 24 months
Foot Traffic 24 hours
Vehicle Traffic 48 hours
Impact Strength >18 joules
Work Time 20 mins @ 25ºC
Bond Strength >2.5MPA (concrete failure)
Final Cure 7 days @ 25 ºC
Modulus of Elasticity 15GPa
Chemical Resistance
20% Hydrochloric Acid
20% Sulphuric Acid
20% Nitric Acid
10% Acetic Acid
5% Lactic Acid
20% Phosphoric Acid
30% Sodium Hydroxide
10% Methanol Ammonium Solution
Isopropyl Alcohol
Trichloroethylene
Milk
Ethyl Acetate
Hexane
Blood
Sugar
Soya Bean Oil
Motor
Oil Flour
Application Directions
Substrate Preparation
The surface must be clean and free from all loose particles including dust, laitance, greases, coatings, curing compounds or any other foreign matter. The substrate must be prepared by way of degreasing, grinding or captive shot blasting to expose the aggregate and provide a suitable profile. Allow floor to dry if degreasing has been carried out before applying Enviro Epoxy SL system.
Priming
Apply 1 coat of Enviro Epoxy B-LV to prepared substrate at a rate of 8-10m²/L. Allow Epoxy B-LV to fully cure and ensure no pinholes exist before top coating with Enviro Epoxy SL.
Mixing
All mixing to be carried out by mechanical means. Add Part A to a suitable clean mixing vessel (If using a colour pack, ensure colour pack is added to Part A and mixed well until uniformly dispersed through Part A). Slowly add Part C (aggregate) to the vessel and mix well. While continually mixing, slowly add the Part B and mix for approximately 2 minutes after final addition of filler to ensure a homogeneous, uniform mix.
Application
Mix only sufficient materials as can be applied in the specified work time. Enviro Epoxy SL can be applied with a notched or flat trowel. Spread evenly over the prepared surface to a minimum 2mm thickness. Over roll with spiked roller to remove any trapped air.
Joints
All joints to be filled with a suitable sealant to suit the intended use and chemical conditions of the floor.
Estimating Data & Packaging
Enviro Epoxy SL is supplied as a 22kg (approximately 11.2L) kit proportioned for use and will cover approximately 5.7m² at 2mm.
Curing
Pedestrian Traffic – 24 hours and Vehicle Traffic – 48 hours
Cleaning
Enviro Epoxy SL should be removed from all tools and equipment prior to hardening with Enviro Thinner No.1 or Thinner No.7. Observe all OH&S and MSDS information pertaining to safe usage and handling of solvents. Cured material can be only removed mechanically.
Shelf Life
Enviro Epoxy SL can be stored in its original sealed containers for 24 months in controlled environments.
Safety Advice
Enviro Epoxy SL contents are considered non-flammable. Always provide adequate ventilation and wear appropriate Personal Protection Equipment (PPE) during use. Avoid breathing vapours. Avoid contact with skin. If swallowed, DO NOT induce vomiting, give glass of water and seek immediate medical advice. If contact with skin, wash off splashes of material with clean water and soap. If irritation occurs seek immediate medical advice. Refer to MSDS.
Downloads
- Technical Data Sheet
|
